|Airscale generic WWII Allied cockpit placards in 1/32 scale
placards for WWII Allied subjects
||- 6.75 GPB
A printed decal sheet
||- No continuous clear film.
- Extremely good register and printing quality.
- Very useful to detail cockpits and interiors.
No silver color.
decal sheet is clearly devoted to the detailer. Specially the cockpit
detailer/scratchbuilder. Product AS32-PLA consist of typical
placards found in WWII Allied aircraft cockpits.
sheet is printed in three colors: black, white and red. That's my only
complain of this item, as many placards are actually printed over
Aluminum sheets, and therefore a silver layer could be used... A
glass will show you that all texts are readable. An advantage over
other similar sheets is that all dials have
individual clear films, so you don't have to cut the surrounding clear
this is a generic sheet, some placards may not be exactly the size you
need to make them fit in every spot, but small trimming won't detract
from the final appearance. Make your measurements before dipping them
in the water, just to be sure.
Although this is a set of cockpit placards, I'm sure many of them will find their way to landing gear legs, engine compartments and gun bays. Whatever is the case, they will give an extra life to your model.